News/Blog

Upcoming G&M Event- Product Safety Symposium in San Jose, CA

by Rona Tumamao (April 19, 2018)

  G&M Compliance will be holding the following event in the month of May 2018. Please join us! CCC Regulations for Household and Similar Appliances- ISPCE 2018 Date: Tuesday, May 15th, 2018 from 10:50 am – 11:40 am Location: ISPCE Conference- San Jose, CA Room TBD Speaker: Aiying He, ISCCC Officer from Beijing, China China […]


News/Blog

Upcoming G&M Seminar- China & India Training in Santa Clara, CA

by Rona Tumamao (April 19, 2018)

  G&M Compliance will be holding the following seminar in the month of May 2018. Please join us!   China & India Compulsory Product Certification Training Seminar Date: Thursday, May 17th, 2018 Location: Embassy Suites Santa Clara – 2885 Lakeside Dr., Santa Clara, CA 95054 Delegate Room Speakers: Paul Wang, China Compliance Officer, G&M Compliance & […]


News/Blog

Upcoming G&M Seminar- China & India Training in Del Mar, CA

by Rona Tumamao (April 19, 2018)

  G&M Compliance will be holding the following seminar in the month of May 2018. Please join us!   Product Compliance Certification for China- Del Mar Electronics & Manufacturing Show Date: Wednesday, May 2nd 2018 at 1 pm Location: Del Mar Trade Show- Del Mar, CA IPC Room Speaker: Thomas Ha, Partner G&M Compliance Mandatory […]


News/Blog

Important China CCC Mark & Labeling Changes after May 1, 2018

by G&M Compliance (March 21, 2018)

China CNCA authority issued on March 15, 2018 an announcement concerning the CCC compulsory product certification mark.  In order to further implement the State Council’s spirit of the Nineteenth National Congress, CNCA decides to release the reform management of CCC mark.  The following are key points of the CNCA announcement: I.  Cancel registration and charges […]


News/Blog

UL/EN/IEC 60065 (Edition 8) Transition Deadline Approaching – Deadline is November 17, 2017

by G&M Compliance (March 21, 2018)

IEC 60065, Edition No. 8, Audio, Video and Similar Electronic Apparatus – Safety requirements, was published in June 2014, with a transition deadline of 17 November 2017 for the EU and EN version. This standard transition affects manufacturers of Audio Video equipment/consumer electronics with existing product certifications based on Edition No. 7.2 of IEC 60065. […]


News/Blog

New RoHS Requirement for Taiwan BSMI Certification

by G&M Compliance (September 14, 2017)

As of July 1st, 2017 the Taiwanese Bureau of Standards, Metrology and Inspection (BSMI) required applicable products entering the country to comply with a new RoHS requirement. The products affected by this new requirement can be found in the table below: The new requirement can be found in Section 5 of Taiwanese standard CNS 15663 […]


News/Blog

India New List of Product Categories Requiring Mandatory BIS Certification

by G&M Compliance (September 7, 2017)

The Indian Department of Electronics and Information Technology (DEITY) issued “List 3” product expansion under the Compulsory Registration Order on August 16, 2017. In addition to the products covered on “List 1” and “List 2″, the compulsory registration scheme has expanded to cover another 13 products. The newly introduced products are: 1. Recessed LED Lights […]


News/Blog

SRRC Certification Process – Focusing on Modular Approval

by Kelsey Maffett (May 24, 2017)

SRRC−State Radio Regulatory Commission is the authority responsible for granting the SRRC certificate. This certification is required for equipment and appliances that have a radio transmitting function. It is essential for both industrial and residential products; no differentiation is established between the two for certification purpose. For SRRC type approval, each and every model has […]


News/Blog

China CCC New GB Standards for Household and Similar Plugs and Sockets

by G&M Compliance (April 10, 2017)

China has released a new national standard GB2099.3-2015 “Household and similar plugs and sockets, Part 2-5: Special requirements of converter” and GB2099.7-2015 “Household and similar plugs sockets, Part 2-7: Extension of special requirements for line sockets”. The above standards were published on October 13, 2015 and will be implemented and enforced on April 14, 2017. […]


News/Blog

Chinese Customs and Regulations For Imports: Are You Prepared?

by G&M Compliance (November 20, 2016)

Thinking about doing business in China? Products imported into China are subject to a large list of rules and regulations. Crossing through Chinese customs successfully can save you precious time and money, but it requires a thorough understanding of the relevant standards and the proper documentation. An experienced professional compliance service can ensure you pass […]


Page 1 of 1112345...10...Last »