UL Certification

New Announcement: My Product Line Went to Hazard Based 62368-1, and All I Got Was This Lousy CB Report

by Rona Tumamao (August 21, 2018)

  For additional information, please contact G&M Compliance, Inc. at 714-628-1020


UL Certification

New 62368-1 Hazard Based Standard will Replace ITE 60950 & A/V 60065 on December 20, 2020

by G&M Compliance (June 20, 2018)

Information Technology and Audio/Video equipment manufacturers will need to prepare for this important transition.  Products affected: Computing & networking products:  servers, PCs, routers, power supplies, notebook & laptop computers, etc. Consumer electronics:  amplifiers, home theater systems, digital cameras and music players, etc. Displays:  monitors, TVs and digital projectors, etc. Telecommunication products:  network infrastructure equipment, phones […]


UL Certification

UL 61010A-1 Ed. 1 Jan 1, 2014 Electrical Equipment for Laboratory Use; Part 1: General Requirements

by G&M Compliance (January 2, 2014)

UL announces the withdrawal of the First edition of the Standard for Electrical Equipment for Laboratory Use; Part 1: General Requirements, UL 61010A-1 and its’ Part 2 standards; the First edition of the Standard for Electrical Measuring and Test Equipment, Part 1: General Requirements, UL 61010B-1 and its’ Part 2 standards; and the First edition […]


UL Certification

EN 60950-1 Updates for Information Technology Equipment Manufacturers

by G&M Compliance (August 16, 2013)

Effective January 24, 2013, the European Union will require products placed on the market to comply with EN 60950-1:2006/ A11:2009/ A12:2011 and effective March 1, 2013, A1:2010 will also be required. In addition, for UL/CUL certification, effective March 1, 2013, UL will certify new products and products with significant changes, to CSA/UL 60950-1 Second Edition, […]


UL Certification

EN 61010-1 3rd Edition Compliance Required in EU by October 2013

by G&M Compliance (July 16, 2013)

CENELEC/IEC 61010-1 is moving to Third Edition. 61010-1 is the internationally harmonized safety standard for laboratory, process control, and test & measurement equipment. Products sold into the EU must comply with the 3rd edition of EN 61010-1 by October 2013. EN 61010-1: 2001 will no longer be able to give the presumption of conformity to […]


UL Certification

UL launches enhanced Certification Mark and badge system

by G&M Compliance (May 20, 2013)

Products today must meet a diverse spectrum of certification and compliance requirements, and there is a growing need to provide more transparency into products in the marketplace. In response to evolving customer needs, UL (Underwriters Laboratories), a world leader in advancing safety, today unveiled an enhanced version of its iconic UL Certification Mark as well […]


UL Certification

Upgrade EN 60065 certification for Audio/Video products mandatory from October 1, 2013

by G&M Compliance (May 20, 2013)

The Commission of the European Union (EU) recently published an updated list of standards concerning compliance with the essential requirements of its Directive 2001/95/EC on general product safety and 2006/95/EC Low Voltage Directive (LVD). Of particular interest to all audio and video equipment manufacturers is the updated harmonized standard, EN 60065:2002 + A1:2006 + A11:2008 […]


UL Certification

UL is Accredited by BIS for Compulsory Registration Testing of 15 Electronic Products

by G&M Compliance (March 1, 2013)

On September 7, 2012, the Indian Department of Electronics and Information Technology (DEIT) issued the Electronics & Information Technology Goods (Requirement for Compulsory Registration) Order, 2012. Fifteen electronic products will be required to comply with the applicable Indian safety standards and mandatory registration before they are imported to, distributed, or sold in India. These products […]


UL Certification

UL Now Can Create and Develop Canadian Standards

by G&M Compliance (February 14, 2013)

UL has recently been accredited by the Standards Council of Canada (SCC) as one of only two standards development organizations based outside of Canada.  The accreditation enables UL to create and develop Standards for Canada along with fully harmonized bi-national standards for the U.S. and Canadian marketplace, enabling more efficient manufacturer access to valuable markets.  […]